Shopping Bag
Water Softner Nitrate Reduction System 1.5 CU FT Softner Resin/Nitrate Select Resin -1054 Tank with Fleck 5600 SXT Valve

Water Softner Nitrate Reduction System 1.5 CU FT Softner Resin/Nitrate Select Resin -1054 Tank with Fleck 5600 SXT Valve

review
0
0
5
On sale $885.00
Retail Price:$1,050.00
Your Savings:$165.00(16%)
In Stock
Part Number:546
  • 1/3 Nitrate Resin and 2/3 Softening Resin
  • 10 GPM Service Flow
  • Removes Nitrates/Nitrites
  • Removes Water Hardness
  • Fleck 5600SXT Digital Control Head
  • Complete System
  • 10-inchx54-inch resin tank
  • Riser tube with distributor basket
  • 1.5 cubic feet total resin
  • Fleck 5600SXT Digital Control Head
  • 1" Bypass
  • Standard Brine Tank with Safety Float

    On-Demand
  • Flow meter measures water and regenerates based on water use, not time, conserving salt and water.
  • 19,800 ppm/32,000 grain capacity (1/3 Nitrate Resin and 2/3 Softening Resin)
  • Contains 0.5 cubic feet of nitrate specific resin capable of removing up to 19,800 ppm of nitrates/nitrites and 1.0 cubic foot high capacity softening 
  • resin capable of removing 32,000 grains of hardness between regeneration cycles.

    10 GPM Service Flow-
    Treats a maximum flow rate of 10 gallons per minute.

    Removes Nitrates/Nitrites-
    Nitrate selective resin traps and elimates harmful nitrates/nitrites.

    Prevents "Blue Baby Syndrome"-
    Methemoglobinemia reduces the ability of blood to properly transport oxygen.

    Removes Water Hardness-
    Ion exchange process physically removes the ions that cause hard water.

    Eliminates Scale-
    Water that has been softened does not form scale buildup on faucets or fixtures or inside pipes.

    Reduces Soap Use-
    Soft water improves soap efficiency, reducing the amount required for dishes, laundry, and bathing.

    Fleck 5600SXT Digital Control Head-
    Low cost metered head provides efficient treatment at an economical price. 5 year warranty on valve.

    FRP Mineral Tank
    Durable, high quality polyglass tank made by a trusted name it tank manufacturing. 10 Year tank warranty.

    Nitrate/Nitrite Specific Resin-
    High quality ion-exchange resin specifically targets nitrates/nitrates.

    High Capacity Resin-
    High quality ion-exchange resin provides hard water treatment.

    Standard Square Brine Tank-
    Used for holding salt used during the regeneration process. Measure approximately 15-inchx17-inchx33-inch and holds approximately 250 lbs of salt.
  • Note : If you have more then 2 ppm Chlorine incoming feed water, a pre carbon filter is recommended.
  • Recently Viewed Items